Use this foot for better visibility when attaching ribbon and lace,
or guiding lightweight decorative stitching. The raised guidelines
on the foot ensure that you stitch with accuracy. This foot is
perfect for decorative construction and the Baby Lock exclusive
Wave Stitch.
MACHINE SETTINGS
Any stitching application can be used (select one and check with
instruction book for length and width setting for specific stitch
selection).
1. Cut all threads to 4 inches (10 cm) in length.
2. Place fabric under the presser foot directly below the needles.
3. Lower the presser foot.
4. Turn the handwheel toward you to form 2 or 3 stitches.
5. Start to sew slowly.
6. After the first few stitches, stop and cut excess threads.
7. Start the next seam at the toe of the presser foot.
Note: You only need to raise and lower the presser foot when
working with thick fabrics or when precise positioning is required.
Be careful not to push or pull the fabric. The serger will feed it
evenly without help.
Clear Foot
(BLE8-CLF)
Instructions
Needle
position
guide
Tape slot
www.babylock.com
