www.babylock.com
Use this foot for guiding lace onto your fabric with a 2-thread
flatlock or to attach ribbon to your fabric under a cover stitch.
Or attach decorative trim by combining an overlock stitch with
a chain stitch. Follow your “Quick Reference Threading Guide”
for various stitches and settings.
MACHINE SETTINGS
Lace Applicator Foot
(BLE8-LF)
Instructions
1. Snap on the lace applicator and set up the
machine for the stitch you desire.
2. Loosen adjustable screw on the top of the lace
foot (fig. 1).
3. Raise the presser foot.
4. Place fabric right side up under the foot up to the
cutting blade.
5. Insert lace right side down into the guide and
under the foot against the inside edge of the guide
(fig. 2).
6. Align right edge of guide with placement of right
edge of lace.
7. Move the guide right or left to align with the
needles being used (fig. 3).
8. Lower the presser foot.
9. Check guide position and tighten the screw.
10. Test sew sample for desired effect.
ADjuSTMENT OF GuIDE
Needle:
Right, left, both or
Coverstitch
Upper knife:
Engaged “UNLOCKED”
Differential feed:
Normal
Stitch length:
3-4
Stitch width:
3.5
