29
3
Specifying Stitching Settings
Lines of the drawing are sewn with satin stitches and areas are sewn with fill stitches.
The following settings can be specified.
1
Satin stitch (lines): thickness and stitch density
2
Fill stitch (areas): sewing direction and stitch density
If the drawing data is saved, the settings can be changed after a trial embroidery of the design
is sewn. (Refer to [Saving Image Data] on page 39.)
1. Displaying the Stitching Settings Screen
1
Press
.
2
The screen shown at the left appears.
1
Reduces the size of the pattern
The size of the drawn pattern can be changed. (Refer to page 32.)
2
Specifies the width of the satin stitches used to sew the lines of the
drawing (Refer to page 30.)
3
Specifies the sewing direction for fill stitches (Refer to page 30.)
4
Specifies the stitch density (Refer to page 31.)
5
Corrects shrinkage
When sewing embroidery, stitched areas may shrink. If this happens,
the stitching can be corrected to prevent shrinkage. (Refer to page
44.)
*
To quit specifying settings, press
.
1
2
3
4
5
