Baby Lock Jubilant BL80B, Инструкция и справочник

Страница: 53 / 68

Making adjustments
51
V
A
R
IOU
S ST
IT
C
H
ES
3
■
Heirloom stitching
When sewing with the wing needle, the needle holes are
enlarged, creating a lace-like decorative stitch. This is used to
decorate hems and tablecloths on thin or medium weight
fabrics in addition to plain weave fabrics.
a
Install the wing needle.
• Use a 130/705H 100/16 wing needle.
• For details on installing a needle, refer to “Replacing
the needle” on page 20.
• The needle threader cannot be used with the wing
needle, otherwise the machine may be damaged.
Manually pass the thread through the eye of the
needle from the front to the back.
b
Attach monogramming foot “N”.
c
Select a stitch.
• For details, refer to “Stitch Chart” on page 33.
d
Start sewing.
Your stitch pattern may sometimes turn out poorly, depending
on the type or thickness of fabric, the stabilizer material used,
sewing speed, etc. If your sewing does not turn out well, sew
trial stitches using the same conditions as the real sewing, and
adjust the stitch pattern as explained below. If the stitch
pattern does not turn out well even after making adjustments
based on the stitch pattern described below, make
adjustments for each stitch pattern individually.
a
Turn the stitch pattern selection dial to select (--).
b
Attach monogramming foot “N” and sew the stitch
pattern.
c
Compare the finished stitch pattern to the illustration
of the correct stitch pattern below.
d
Adjust the stitch pattern with the stitch length keys.

If the stitch pattern is bunched:
Press the “+” stitch length key.

The displayed value increases each time the button is
pressed and the stitch pattern will lengthen.
No. 37 38 40 41
Stitch
CAUTION
• When sewing with the wing needle, select a
stitch width of 6.0 mm (15/64 inch) or less,
otherwise the needle may bend or break.
• After adjusting the stitch width, slowly turn
the handwheel toward you (counterclockwise)
and check that the needle does not touch the
presser foot. If the needle hits the presser foot,
the needle may bend or break.
Making adjustments
Memo
• This adjustment can be made to (Quilting stippling
stitch), decorative stitches, decorative satin stitches,
satin stitches and cross stitch stitches. For details on
the built-in stitch patterns, refer to “Stitch Chart” on
page 33.
Note
• Be sure to use monogramming foot “N”. Adjustments
may not be made correctly with any other presser foot.