Baby Lock Jubilant BL80B, Инструкция и справочник

Страница: 47 / 68

Utility stitches
45
V
A
R
IOU
S ST
IT
C
H
ES
3

For a seam allowance on the left side
Align the left side of the presser foot with the edge of the
fabric, and set the stitch width 1.5 mm (1/16 inch) and
sew using stitch .
■
Quilting
Sandwiching batting between the top and bottom layers of
fabric is called “quilting”. Quilts can easily be sewn using the
walking foot* and the quilting guide*.
* Items sold separately, please contact your authorized
Baby Lock retailer.
a
Baste the fabric to be quilted.
b
Remove the presser foot and the presser foot holder.
• For details, refer to “Removing and attaching the
presser foot holder” on page 22.
c
Hook the connecting fork of the walking foot onto the
needle clamp screw.
d
Lower the presser foot lever, and then tighten the
presser foot holder screw with the screwdriver.
e
Select a stitch.
• For details, refer to “Stitch Chart” on page 33.
f
Place one hand on each side of the presser foot, and
then evenly guide the fabric while sewing.

Using the quilting guide (sold separately)
Use the quilting guide to sew parallel stitches that are
equally spaced.
a
Insert the stem of the quilting guide into the hole at the
rear of the walking foot or presser foot holder.
b
Adjust the stem of the quilting guide so that the guide
aligns with the seam that has already been sewn.
1
6.5 mm (1/4 inch)
Memo
• To change the width of the seam allowance (needle
position), adjust the stitch width. For details, refer to
“Setting the stitch width” on page 27 and “Sewing an
even seam allowance” on page 29.
Note
• Thread the needle manually when using the walking
foot, or attach the walking foot only after threading the
needle using the needle threader.
• When quilting, use a 90/14 home sewing machine
needle.
• The walking foot can only be used with straight or
zigzag stitch patterns. Do not sew reverse stitches with
the walking foot.
• When sewing with the walking foot, sew at a speed
between slow and medium.
• When using the walking foot, test sew on a scrap piece
of fabric that is to be used in project.
1
Connecting fork
2
Needle clamp screw
1
a
b
CAUTION
• Be sure to securely tighten the screws with the
screwdriver, otherwise the needle may touch
the presser foot, causing it to bend or break.
• Before starting to sew, slowly turn the
handwheel toward you (counterclockwise) and
check that the needle does not touch the
presser foot. If the needle hits the presser foot,
the needle may bend or break.
No. 04 18
Stitch

Walking foot

Presser foot holder