Baby Lock Jubilant BL80B, Инструкция и справочник

Страница: 13 / 68

Changing the Machine Settings
GE
T
T
IN
G RE
A
D
Y
11
1
■
Changing the needle stop position
The needle position when stitching is finished can be
changed from the down position to the up position.
a
Press the needle position button and hold for
approximately 3 seconds.

The machine beeps twice, and the needle stop
position changes to the up position.
■
Changing the initial needle position
The stitch automatically selected when the machine is
turned on can be changed from “3 Straight stitch (Middle)”
to “1 Straight stitch (Left)”.
a
Press and hold the “–” stitch length key while turning
on the machine.

The machine beeps once, and the initial needle
position changes to “1 Straight stitch (Left)”.
■
Turning on/off the buzzer
The buzzer can be turned off.
a
Press and hold “–” stitch width key while turning on
the machine.

The machine starts up with no beep, and the buzzer
is turned off.
Changing the Machine Settings
Memo
• When the same operation is performed, the machine
beeps once, and the needle stop position changes to
the down position.
• When this setting is changed, the machine beeps, even
if the buzzer is turned off.
Memo
• When the same operation is performed, the machine
beeps once, and the initial needle position changes to
“3 Straight stitch (Middle)”.
• When this setting is changed, the machine beeps, even
if the buzzer is turned off.
Memo
• When the same operation is performed, the machine
beeps once, and the buzzer is turned on.
CAUTION
• When the needle stop position or initial needle
position is changed, the machine will beep,
even if the buzzer has been turned off.