Baby Lock Euphoria BLC4, Инструкция и справочник

Страница: 21 / 48

T
H
R
E
A
D
I
N
G
18
Note: The Euphoria must be in the locked threading position when using the needle threader.
"Left Needle" C-1
1. Raise presser foot and place the thread on the far left spool pin. Slip the thread into the telescopic
antenna thread guide directly above the thread spool. Snap the thread into the pretension thread
guide on top of machine, down thread path, and in the guide just below the faceplate.
2. Pull an 8-inch (20cm) length of thread through the guide. Follow the arrows as shown in below
illustration.
3. Using the needle threader, thread needle in the C-1 position (see page 19).
"Second from left" C-2
1. Raise presser foot and place the thread on the second from left spool pin. Slip the thread into the
telescopic antenna thread guide directly above the thread spool. Snap the thread into the
pretension thread guide on top of machine, down thread path, and in the guide just below the
faceplate.
2. Pull an 8-inch (20cm) length of thread through the guide. Follow the arrows as shown in below
illustration.
3. Using the needle threader, thread needle in the C-2 position (see page 19).
"Third from left" C-3
1. Raise presser foot and place the thread on the third from left spool pin. Slip the thread into the
telescopic antenna thread guide directly above the thread spool. Snap the thread into the
pretension thread guide on top of machine, down thread path and in the guide just below the
faceplate.
2. Pull an 8-inch (20cm) length of thread through the guide. Follow the arrows as shown in below illus-
tration.
3. Using the needle threader, thread needle in the C-3 position (see page 19).
NOTE: After threading the needles, the thread is then placed to the left and top of the presser foot.
Chain / Cover Needles
C1 C2 C3 CL