Baby Lock emore BLMR, Инструкция и справочник

Страница: 14 / 92

12
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Operation buttons
The operation buttons help you to easily perform various basic machine operations.
a “Start/Stop” button /
Press the “Start/Stop” button to start or stop embroidering.
The machine embroiders at a slow speed while the button
is pressed. When embroidering is stopped, the needle is
lowered in the fabric.
The button changes color according to the machine’s
operation mode.
b “Needle Position” button
Press the “Needle Position” button to raise or lower the
needle. Pressing the button twice sews one stitch.
c “Thread Cutter” button
Press the “Thread Cutter” button after embroidering is
stopped to cut both the upper and the bobbin threads.
CAUTION
Note
z
Do not press (“Thread Cutter” button)
if there is no fabric under the presser foot or
while the machine is embroidering,
otherwise damage to the machine may
occur.
z
When cutting thread thicker than #30, nylon
thread or other special threads, use the
thread cutter on the side of the machine.
Green: The machine is ready to embroider or
is embroidering.
Red: The machine can not embroider.
Orange: The machine is winding the bobbin
thread, or the bobbin winder shaft is
moved to the right side.
●
Do not press (“Thread Cutter”
button) after the threads have already
been cut, otherwise the needle may
break, the threads may become tangled
or damage to the machine may occur.