Baby Lock Coronet User Manual
| 17
Optional Accessory: Horizontal Spool Pin
An optional horizontal spool pin is available for metallic and specialty threads wound on a spool
(not a cone).
To install the optional horizontal spool pin
1.
Remove the nut and washer from the post.
Place washer over the threaded hole on the top
of machine.
2.
Replace nut and screw the post into the
threaded hole. Tighten the nut to secure.
3.
Place the clamp on the post and place
remaining pin in the clamp. Tighten the screw
to hold in place.
4.
Elevate the end of the pin slightly above horizontal to keep spool from falling off.
5.
Thread the machine beginning at horizontal spool pin, bypassing the thread antenna. When using
delicate threads with the Horizontal Spool Pin, skip thread guide A. Thread the top hole only of the
three-hole thread guide B, back to front. (See Right side view, items 2 and 3.)
6.
Continue threading the machine as described in steps 3 through 6 in the section named Threading
Your Machine later in this manual.