Baby Lock Coronet User Manual
| 15
5.
After the bolts are in place, plug the cable into
the USB-style connection located on the front-
left side of the machine.
6.
Remove the protective plastic from the touch-screen display before using.
To use the handlebar buttons
Press the Up/Down
button to cycle the
needle a half stitch.
Press the Start/Stop
button to start or stop
the machine from
stitching.
Press the Speed Up or Speed Down buttons to change the
stitches per minute setting (manual mode) or stitches per
inch (regulated mode).
Optional Accessory: Rear Handlebars and Display
To install the optional rear handlebars and display
Â
IMPORTANT: Install the rear handlebars
and display after the front handlebars and
display have been installed.
1.
Check that the machine is unplugged from the
electrical outlet.
U
CAUTION: All power to the machine must
be turned off when installing the rear
handlebars. Failure to do so can result in
damage to the machine.
2.
The rear handlebars come mounted to a bracket. Line up the two holes in the bracket with those on
the rear of the machine.