Baby Lock BNCW, Инструкция и справочник

Страница: 31 / 35

USING THE MACHINE TO POSITION EMBROIDERY PATTERNS FOR CREATING CUTWORK
30
c
Use and to display the thread
color (or cutwork needle) where the
machine will be paused before being sewn
(being cut) at the top of the thread color
sequence display, and then touch .
In this example, specify a pause location as follow to
pause the machine before the first pattern is cut out.
a Thread color (or cutwork needle) where you wish
to stop the machine before embroidering it
(cutting it)
→
appears to indicate where the machine will be
paused.
d
Touch .
■
Deleting a pause location
Refer to step
c
to display the thread color (or
cutwork needle) with the pause location to be
deleted at the top of the thread color sequence
display, and then touch . An unnecessary
pause location can also be deleted after a trial
embroidery.
Note
• Complete pattern editing before you start
checking/adding/deleting pause locations
for the selected pattern.
a
Memo
• If the patterns are grouped, the sewing
order of colors in the combined border
embroidery pattern is automatically
changed so that the same color can be
continuously sewn.
a
Pause location
The pause locations are specified as follow
after you ungroup the patterns by touching
in the pattern editing screen.
...
CAUTION
• Be careful when deleting pause locations. If a pause
location is incorrectly deleted, the fabric may be cut
or embroidered at an unintended location.
a