Baby Lock BL J18-QM, Руководство по установке

Страница: 52 / 66

Pg. 51
Step 8: Carriage to Frame Assembly
Parts Needed:
1- Bottom Carriage/Motor Plate
1- Long Belt
Fig. 8-B
Fig. 8-C
Note: For the following steps refer to Fig. 8-D for
direction of belt teeth when installing.
8-1 . Stand your bottom carriage on its side with
the belt sitting on the table, as show in Fig. 8-A.
8-2 . Feed the end of your belt into the gearbox in
the carriage , as shown in Fig. 8-B.
8-3 . Push the belt back down and keep feeding it
through until you can see it come out just below
where it entered, as shown in Fig. 8-C.
8-4 .
Pull about half of the belt through the slot,
and gently set your carriage down onto the frame,
making sure the wheels line up on the track.
Fig. 8-A
Encoder
Fig. 8-D
Top
Plate
Belt
Bottom
Plate
Belt
front of f
rame
Notice the
direction
of belt teeth