Baby Lock BL J18-QM, Руководство по установке, Страница: 34 / 66

Pg. 33
Step 8: Sewing Machine to Bottom Carriage Assembly
Parts Needed:
1- Bottom Carriage/Motor Plate
1- Short Belt
1- Sewing Machine
8-1 . Thread the belt into the gear box with the teeth facing up,
until it comes out underneath the carriage. (See Fig. 8-A.)
8-2 . Feed the belt through, until it comes back up out of the
gear box, as shown in Fig. 8-B. Use your fingers underneath the
carriage to redirect the belt back up.
Fig. 8-B
Fig. 8-A
8-3 . Pull about half of the belt through the gearbox, across
the top half of the Motor Plate.
8-4 .
Now carefully place the Jewel Sewing Machine onto
the carriage, aligning the wheels with the carriage track.
8-5 .
Thread the front end of the belt up through the Belt
clamp and out the top, as shown in Fig. 8-C and 8-D. Make
sure to watch the direction the belt teeth should face.
8-6 . Now tighten the Belt Clamp together using a 10mm
open ended wrench, as shown in Fig. 8-E.
Note:
Make sure to keep the zip ties loose enough to allow
the ribbon cable to slide easily without stressing wires or
damaging them.
Fig. 8-C
Fig. 8-D
Fig. 8-E