Baby Lock Altair 2, Инструкция и справочник

Страница: 58 / 212

SEWING
56
b
Adjust the spacing between the main foot controller
and side pedal.
* Use the markings on the mounting plate as a
convenient guide to adjust the spacing.
c
Firmly tighten the mounting screws to secure the main
foot controller and side pedal.
d
Turn off the machine.
e
Insert the plug for the side pedal into the jack on the
main foot controller.
f
Insert the plug for the main foot controller into the foot
controller jack on the right side of the machine.
1
Main foot controller
2
Foot controller jack
g
Turn on the machine. And then touch and
display page 2 of the settings screen.
h
Select the functions to be performed by the multi-
function foot controller.
* If you set the “Reverse Stitch” function on the heel
switch, machine operates the same as pressing
(Reverse stitch button) on the machine.
* Reinforcement stitching may be applied depending
on the selected stitch pattern. For the details, refer to
“Automatic Reverse/Reinforcement Stitching” on
page 59.
Memo
• To readjust the spacing between the main foot
controller and side pedal, slightly loosen the
mounting screws, and then adjust the positions of
the main foot controller and side pedal.
Memo
• The length of the cord for the main foot controller
can be adjusted. (page 57)
a
b
Memo
• Before specifying the functions, connect the multi-
function foot controller to the machine. The
settings screen is activated the first time that the
machine detects the multi-function foot controller.
Controller Functions that can be specified
1
Main foot controller Start/Stop
2
Heel switch Select any of the following:
• [Thread Cutting]
• [Needle Position – Up/Down]
• [Single Stitch]
• [Reverse Stitch] (Reinforcement
Stitch) *
• [Presser Foot Up/Down]
• [No Setting]
3
Side pedal
Memo
• If you set [Reverse Stitch] on the side pedal, you
can create a darning stitch effect using zigzag
stitches. With both feet, keep pressing the main
foot controller, and repeat pressing and releasing
the side pedal to sew forward and reverse in turn.
Machine will reverse at the speed you press the
main foot controller.
a
b
c
3
2