Baby Lock accomplish 2, Инструкция и справочник

Страница: 17 / 60

15
CAUTION
Turn off the power to the machine before threading the upper thread. Otherwise, it may cause injuries if you unintentionally press down on the foot controller.
Thread
Needle Hole
Scarf
(depression on
needle shaft)
Long
Groove
1
2
86
7
9
0
A
3
4
5
Upper Threading
✽
Before threading the machine, prepare it as described below.
1
Raise the presser foot lever.
2
Turn the handwheel toward you until the thread take-up lever is positioned
as shown in the diagram.
The needle is raised to it's highest position.
3
Pass the thread through the triangular hole of the thread guide bar. (page 12)
1
2
3
4
2 2 2
6
5
3
7
8
1
9
0
A
Upper Threading
✽
Thread tension may not be
adjusted adequately if the thread
does not pass correctly through
the take-up spring (
4
).
1
Starting with the hole on the right end,
pass the thread through the holes in the
three-holed thread guide from above.
2
Pass the thread through
the thread guide (right).
3
Pass the thread clockwise
around the thread tension dial.
4
Pass the thread through
the thread take-up spring.
5
Pass the thread through
the thread guide (lower).
6
Pass the thread through
the thread guide (left).
7
Pass the thread through
the thread take-up lever
from right to left.
8
Pass the thread through
the thread guide (left).
9
Pass the thread through the thread guide.
0
Pass the thread behind the
needle bar thread guide.
A
Pass the thread through the needle from
left to right. * For details on using the
needle threader, refer to page 17.
4
*1 *2
When using strong thread
such as synthetic thread, pass
the thread through all holes
(*1). If the thread still tangles
or breaks, use a different
threading method (*2).