Baby Lock accomplish 2, Инструкция и справочник

Страница: 10 / 60

8
Before You Begin (1)
Power Cord
Foot Controller
Power Switch
I
O
Handwheel
1
2
3
4
5
6
7
Stitch Length Regulator
Reference Mark
Lower number
= shorter stitches
Higher number
= longer stitches
Reverse Stitch
Lever
Upper Thread Tension
Loosen Tighten
Tension Block
Thread Tension Dial
●
When tighter thread tension is
desired, turn the tension dial
to the right. Upper and bobbin
threads will meet on right side
of the fabric.
●
When looser thread tension is
desired, turn tension dial to the
left. Upper and lower threads
will then meet on wrong side of
fabric.
Main Power Switch
●
Press power switch toward the
"I" position to turn machine on.
●
To turn the machine off, press
the power switch toward the
"O" position.
Handwheel
●
Position needle using
handwheel.
✽
Always turn handwheel towards
you.
CAUTION
Be sure to keep the area under
and around the needle clear.
Stitch Length Regulator
●
Adjust desired stitch length
using stitch regulator dial.
Reverse Stitch Lever
●
Sewing in reverse is possible
when the reverse stitch lever is
in the lowered position.
✽
Make sure to continuously press
the lever to its lowest position
when reverse sewing is desired.
✽
When the stitch regulator dial is
set between 5-7 mm, the reverse
stitch length is always 5 mm.
Power Cord and Foot Controller
WARNING
Please use common household
current.
●
Attach power cord.
●
Insert foot controller jack into machine.
●
When you press the foot controller
down lightly, the machine will run at
a low speed. When more pressure
is applied to foot controller, the
machine’s speed will increase. When
you remove your foot from the foot
controller, the machine will stop.
Slower
Faster