Baby Lock Acclaim BLES4, Инструкция и справочник

Страница: 47 / 64

W
A
V
E
S
T
I
T
C
H
44
3-Thread Reversed Wave Stitch
You can also get the wave stitch in the back of fabric by crossing the upper and lower looper threads
before the threading ports. This Reversed Wave Stitch is attractive for an expressive stitch with
decorative cover stitches. (fig. A)
1. Move the Wave/Overlock Selector lever from "OVERLOCK" to
"WAVE".
2. Cut the threads from the thread cones, raise presser foot and
remove threads from the thread paths.
3. Engage the threading lever in threading position, for threading the
loopers. (see page 18)
4. Place the right needle thread cone on the second spool pin on left.
5. Slip the right needle thread into the telescopic thread guide directly
above the thread. Follow the left needle threading path down to the
right needle.
6. Thread the right needle using the needle threader. (see page 21)
7. Place the upper looper thread cone on the second from right spool
pin.
8. Slip the upper looper thread into the telescopic thread guide directly above the thread. Follow
the top threading path for the right needle, down the front threading path, through the chrome
thread guide, and directly to the "L" threading port for the lower looper. Thread the lower
looper. (page 18)
Note: This upper looper thread which goes into lower looper through "L" threading port appears as
wave stitch on the back side of fabric.
9. Place the thread cone on the LOWER LOOPER spool pin.
10. Thread lower looper using standard lower looper threading technique. (Refer to Steps 2 - 5 on
page 18) The only difference regarding standard threading is you use the "U" threading port
instead of the "L" port.
11. Place the right needle thread and the lower looper thread from the eye of the upper looper under
the presser foot and to the back.
12. Engage the threading lever in the serging position.
13. Set Stitch Selector on "B" for Wave Stitch.
14. Set Stitch Length and Stitch Width following the illustration below.
Note: It is not recommended to use reversed rolled wave.
A
Right
Side
Wrong
Side
NEEDLES
right
LENGTH
0.75-2.5
WIDTH
5.0
STITCH
SELECTOR
B
WAVE/OVERLOCK
SELECTOR
WAVE
L
R
L R