Baby Lock Acclaim BLES4, Инструкция и справочник

Страница: 55 / 64

Looper Threading Tool
1. Open the front and cutting blade covers, and then raise the
presser foot.
2. At the threading port, cut the looper thread that is to be
replaced. Remove thread from under the foot and the
upper thread guides. Replace cone of thread with
specialty thread.
3. With machine engaged in threading position.
4. Thread specialty thread into the upper thread guides,
leaving an 18 inch (45cm) tail above the threading port.
5. Place the straight end of the looper threading tool into the
threading port. Push the looper threading tool until the end
comes out of the looper eye.
6. Insert the specialty thread tail into the looper threading tool
eye. (fig. A) Pull the straight end of the looper threading
tool through the looper eye bringing the specialty thread
with it. (fig. B)
L R
B
A
U
S
I
N
G
S
P
E
C
I
A
L
T
Y
T
H
R
E
A
D
S
52