Baby Lock Acclaim BLES4, Инструкция и справочник

Страница: 51 / 64

Serging Curves
Inserting Tapes
A
B
To serge around inside or outside curves, guide the fabric into the cutting blade, not the needle(s).
Remember, cutting takes place before the fabric reaches the needle. Because the long serger
presser foot holds the fabric more securely, you may need to raise and lower the presser foot
several times to maneuver around very tight curves.
The slots in the standard presser foot are designed to guide stabilizing tape, narrow elastic or
decorative ribbon into the stitching. Insert tape, elastic or ribbon into the slot and under the back of
the foot. (fig. A)
Adjust the stitch width to match the tape width. Place the fabric under the foot and stitch. (fig. B)
B
A
S
I
C
S
E
R
G
I
N
G
T
E
C
H
N
I
Q
U
E
S
48
Cutting Blade Cover Seam Guide
Use the marks on the cutting blade cover and set the width
dial at "M" to align the fabric for accurate seam allowances.
When using the left needle, the second mark "L" from the
needle indicate 5/8 inch (16mm) from the cutting edge to
the needle.
Use the right needle and the third mark "R" from the needle
to indicate 5/8 inch (16mm) from the cutting edge to the
needle.
Note: Be sure to set the width dial at the "M" setting for
accurate seam allowances.
L R