b4Adventure • Denver Colorado 80216 • 1-844-834-4334 QUESTIONS? [email protected] •
www.b4adventure.com - DC:072020
INSTALLATION INSTRUCTIONS (CONT.):
STEP 6
• Lift left and right brackets to bottom of the 43” (1 m) marker on the tree min. 6 ft (1.8 m), max. 9 ft (2.7 m).
• Position the side brackets so that they are centered on the width of the tree.
• Have another adult hold up the support bars of the Build-A-Branch while assembling the ratchet.
• NOTE: You may need to adjust the front cross strap so that brackets are even and centered on each side.
STEP 7
6
While the other adult helps to hold
the Build-A-Branch in place, Take
the 20 ft x 2 in. ratchet strap and
weave the line through the slots at
the back of each side bracket with
the
black printed line facing out.
Pull the line through until the
ratchet is positioned to where it
will be centered on the tree
between the 2 brackets and
Let the ratchet hang down.
Begin to wrap the side
brackets with the excess line.
Once you finish wrapping the tree
pads, you should end up at the
back of the tree where you can
then begin to ratchet the excess
line until the line and pads are
secure and the ratchet cannot be
tightened further (see pg. 4 for
ratchet instructions).
Wrap line around the top and
bottom of each side bracket.
Use included zip ties to
secure any loose strap
