PAGE 1 OF 3
Symphony Area Light / Optimus 2
Installation Guide for LCA-SB and SYM-AL
NOTE:
Electrical
connections must
be performed by a
qualified, licensed
electrician.
NOTE:
Lockout and tagout power
to pole before installing fixture.
CAUTION, risk of electric shock
Drill Hole Pattern
(top of pole this side)
Ø 0.433"
(Ø 11 mm)
Ø 0.433"
(Ø 11 mm)
Ø 0.709"
(Ø 18 mm)
2.874" (73 mm)
2.
50
0" (
64 m
m
)
2.
38
2" (
61 m
m
)
5.
66
9" (
14
4 m
m
)
Round Light Pole Installations
1.
Slipfitter:
Connect exposed fixture
wire to power wire. Install luminaire on
light pole and tighten M8 screws. Adjust
luminaire angle (-90° ~ 90°).
3.
Motion sensor:
Insert light sensor into
photocell socket and rotate into place. Connect
exposed fixture wire to power wire. Install
fixture on light pole and tighten M8 screws.
Insert motion sensor into socket and rotate into
place. Adjust fixture angle (-90° ~ 90°).
Motion
sensor
2.
Photocell:
Insert light sensor into photocell
socket and rotate into place. Connect
exposed fixture wire to power wire. Install
fixture on light pole and tighten M8 screws.
Adjust fixture angle (-90° ~ 90°).
Photocell
Square Light Pole Installations
1.
Straight arm:
Open pole cap. Open fixture
cover. Push all wire through fixture hole and
align installation hole of fixture to installation
hole of lamp hole. Fasten screws. Connect
exposed luminaire wire to power wire.
Pole
cap
3.
Motion sensor:
Open pole cap. Open fixture cover.
Push all wire through fixture hole and align fixture
and installation location on pole. Fasten screws.
Insert motion sensor into socket and rotate into
place. Connect exposed fixture wire to power wire.
Motion
sensor
Pole
cap
2.
Photocell:
Insert light sensor into socket and rotate
into place. Open pole cap. Open fixture cover.
Push all wire through fixture hole and align fixture
and installation location on pole. Fasten screws.
Connect exposed luminaire wire to power wire.
Photocell
Pole
cap
Per IEC TR 62778,
luminaire should be
positioned so that
prolonged staring into
luminaire at a distance of
0.319 m is not expected.
DO NOT
SCALE
