B-TEK Scales WorldWEIGH C100 Series, Техническое руководство

Страница: 8 / 30

C100 Series Technical Manual
- 5 -
Remote Scale:

The C100 Series can be connected to a remote base through the Remote
scale port on the left side of the scale case.

Place the remote scale platform in the position where it is to be used.
Level the scale by adjusting the four feet. Making sure it is level.

Press key to change between remote base and local base.
Remote Scale Connection
The cable from the remote base goes to a 9 pin male DB9 connecter on the left
side of the C100 with following connections.
Note: The sense wires connections of a six wire load cell are not used, but can
be connected to the respective Excitation pins.
The remote scale provides 5v excitation.
Pin Connection Color on Premade cable
1 or 2 Exci5V Red
4 or 5 Excitation- Black
7 Signal- Green
8 White
3 Shield Blue