B-TEK Scales WorldWEIGH C100 Series, Техническое руководство

Страница: 11 / 30

C100 Series Technical Manual
- 8 -
5. OPERATION
Initial Start-up
Please allow 15 minutes of warm-up time to weight value to stabilizes after
switching on.
1. Power ON/OFF
Power switch is located below the bottom right side of the scale. Switch on
the scale by pressing on/off. The display is switched on and the self test is
started.
If you want to switch off press in the switch in the opposite direction.
2. Switch to Local / Remote Scale

By pressing the display changes from one scale to other scale.
In Local Scale
In Remote Scale

The basic weighing functions are same for both the scales local or
remote.

The number of weighing divisions may be less on the remote scale
dependant on the total capacity of the load cell/s used.
3. Zero
To zero the scale at any time press the key
4. Tare
The weight of any container can be tared by pressing the button so
that with subsequent weighings the net weight of the object being weighed
is always displayed.

Load container to be tared on the pan.

Press the key. Zero is displayed, and tare is subtracted.

Remove weight from the platform. Tared weight is displayed. Only
one tare value can be set. It can be displayed with a minus value.

Once tare is stored, Pressing the key, will clear the tare weight
and Zero the display.
change Local
change remote