64
BTEK T403S Indicator User Instructions
Supervisor menu
2.
Press
UNITS
twice …
bAtch
is displayed. Use this to set the items relating to batching:
l
Set the type of batch operation. (
tYPE
)
l
Select auto or manual operation. (
ModE
)
l
Set gross or net display mode. (
diSP
)
l
Set the conditions for preact. (
PrEAct
)
l
Select negative filling operation.(
nEG FiL
)
Type
Batch
Type
3.
Press
SELECT
…
tYPE
is displayed. There are 4 choices under Type:
2 SPEEd
,
iNGrEd
,
iNdEP
and
FiL-dSc
. Each is explained below:
2 SPEEd
Choose 2 speed when you have one ingredient with a speed
control device.
iNGrEd
Choose ingredient for sequential filling for up to 3 products
at a single speed.
iNdEP
Choose independent when the filling process is run based
on the values set for the outputs.
FiL-dSc
Choose fill-discharge when performing a fill operation
(negative weight) from something like a hopper scale.
for information about settings for each of these
types of batching.
4.
Press
SELECT
…
The current setting is displayed.
5.
Press
UNITS
to scroll through the choices and when your choice is displayed,
press
ZERO
to accept …
tYPE
is displayed.
Mode
Batch
Type
Mode
6.
Press
UNITS
…
ModE
is displayed. Mode has two choices:
Auto
or
MAnuAL
. There is a
description for each type in the section titled
7.
Press
SELECT
…
The current setting is displayed.
8.
Press
UNITS
to toggle between the choices and when your choice is
displayed, press
ZERO
to accept …
ModE
is displayed.
Содержание T403S
