B-TEK Scales T403S, Инструкция пользователя, Страница: 14 / 74

14 BTEK T403S Indicator User Instructions
Indicator applications
Using Entered Tare
To perform a net weighment using entered tare, the following steps describe a typical
operation:
1. With no weight on the scale, if the display does not read 0 press ZERO …
0 is displayed and the center-of-zer o annunciator lights.
2. Key in the tare value of the container or box that will be used to hold the
material that requires a net weight value, and press
TARE …
Tare weight is displayed as a negative value and the NET annunciator
lights.
3. Place the container or box and material to be weighed on the scale …
Net weight of material is displayed.
4. If repeated weighments use the same tared item, you do not need to establish
a new tare value as described in step
2 .
5. To remove the tare weight from the scale, enter 0 , then press TARE …
The tare is cleared and the scale is in gross weigh mode.
Using Preset Tare
Preset tares are entered in a password protected menu. There can be up to 10 tares
numbered 1-10. To perform a net weighment using one of the preset tares, follow these
steps:
1. With no weight on the scale, if the display does not read 0 press ZERO …
0 is displayed and the center-of-zero annunciator lights.
2. Press TARE …
Tare number entry screen appears.
3. Key in the preset tare number and press ZERO …
Tare weight is displayed as a negative value and the NET annunciator
lights.
4. Place container or box and material to be weighed on the scale …
Net weight of material is displayed.
5. Repeat step 4 until you are finished using that tare weight.
Tare is removed automatically if Auto Tare Clear is enabled. To remove the tare
weight manually, select a preset tare register that has a value of 0 for the tare.
If the active unit of measure is lb-oz then tare weights must be entered in the oz
equivalent. To enter 2 lb 4.5 oz you would need to enter 36.5 oz (2 lb = 32 oz plus the
4.5)