Cleaning System ud-800 Page 19
10.
Care and Maintenance
The machine has to be disconnected from the compressed air supply before any
repair work! Wiping with a cloth only with sufficient moisture/wetness!
We recommend regular wet cleaning of intake hoses and intake strainers (at least each time
the cleaning fluid is changed). If the intake strainer is defective, it must be replaced immedi-
ately. Defective intake strainers either have heavy paint build-up, causing clogging of the filter
surface, or the filter suffer damage that allows contaminated cleaning fluid to be drawn in to
the pump, which can damage it or clog the cleaning nozzles.
Clean the perforated stainless steel grille and the interior walls of the machine regularly. Clean
any residue out of the drain pan, in order to ensure reliable drainage of the cleaning agent /
solvent and to ensure that there is permanent sufficient flow capacity in the drain.
It is recommended to use each function of the machine shortly at least once a day in order to
avoid drying of the membranes inside the pumps and keeping the nozzles clean.
When the machine is not operated for a longer period of time (for example during holidays)
a cleaning cycle with fresh cleaning fluid should be performed after the final cleaning cycle
so that the nozzles are not clogged with heavily contaminated cleaning fluid.
The warranty is invalidated, if other than original B-TEC replacement parts
are used!
Customer service: Contact your dealer or directly: B-TEC GmbH
Zunftweg 6-8
31303 Burgdorf / Ehlershausen
Germany
Tel.: +49(0)5085-97100-0
Fax: +49(0)5085-97100-30
Email: [email protected]
www.btecsystems.de
11.
Disposal
If the machine shall be disposed of, please contact B-TEC or your dealer and request an appro-
priate quotation or the requirements for proper disposal.
The machine must not be disposed of as domestic waste, but should be disposed of as hazard-
ous waste depending on the degree of soiling. Contact your local authority for support.
