RELEASE DATE
10/13/2021
REFERENCE NUMBER
INS-1344-00
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • [email protected]
B-K LIGHTING
Faceplate Accessories
HP2
Faceplate Accessories
3. Using a 7/64” allen wrench, loosen the two
(2) #6-32 set screws on the faceplate to allow
accessory to rotate freely.
4. Accessory can rotate 360° independently of
faceplate.
5. When set in final position, tighten two (2)
#6-32 set screws using a 7/64” allen wrench.
2.
Install faceplate using a 1/8” allen wrench
and hand-tighten the five (5) #10-24 faceplate
screws in a star pattern to 30 in-lbs. min.
Do not use a power tool to install screws. Do
not exceed 40 in-lbs.
1. Before installation of faceplate, clean o-ring
groove and collar of debris for a proper seal.
Failure to clean groove of debris will cause
fixture to fail and void product warranty.
Instructions Apply To...
IMPORTANT SAFETY INFORMATION LISTED ON REVERSE
READ, FOLLOW, AND SAVE ALL SAFETY AND INSTALLATION INSTRUCTIONS
Rock Guard
with Optical
Opening
Rock Guard
Glare Shield B
Half Dome B
Accessories Installation Instructions
