Bischoff & Bischoff GmbH | 01.06.2019
EN
77
76
Taiga
| Electric Wheelchair
Electric Wheelchair |
Taiga
Electrical system
Main fuse :
50 A
Battery :
maintenance-free lead acid battery
2 x 12V / 80Ah
Batterry charger :
24V DC 8A
Motor:
2 x 24V / 600W / 4400 rpm
Controller:
PG Drive VR-2, R-Net 90A
Lights:
headlights and rear lights according to
the German traffic regulations [StVZO]
Ambient conditions
Temperature :
0 - 50 °C
Air humidity :
20 - 80 %
Storage conditions
Temperature :
-20 - 60 °C
Air humidity :
45 - 60 %
Equipment
Frame:
Aluminium, powder-coated
Seat and back frame:
Steel, painted
Pad materials:
flame-resistant, tested according to
EN1021-1/2
Brake:
automatic braking system
Electromagnetic engine brake
according to the German traffic regulations
[StVZO]
Operating forces
Joystick:
approx. 1 N
Buttons on the control
panel:
approx. 1 N
Disconnecting the drive
mechanisms:
> 60 N
Caution! Do not use high pressure cleaners or
steam cleaners.
6. Maintenance tips for users
6.1. Cleaning and disinfection
Make sure that the wheelchair is switched off before starting to clean
it.
•
The frame sections and panels of the wheelchair can be cleaned
with a moist cloth. You can use a mild detergent for more stubborn
dirt.
•
The wheels can be cleaned with a wet synthetic fiber brush (do not
use a wire brush!)
•
The seat, seat back and arm rests can be cleaned of dust and minor
dirt with a damp cloth. Do not use aggressive cleaning agents,
because they may attack the surface of the material. The cushions
can be washed with warm water at 40°C and disinfected with a
standard disinfectant.
•
Please note that electrical and electronic components must not
come into contact with water unnecessarily.
