VIA 693/693A AT MAINBOARD
HARDWARE SETUP
3-14
The following jumpers which labeled with “optional” means they are optional
on the mainboard and the related components are normally not populated on
the board. In order to make the mainboard works properly, please make sure all
jumper settings are at correct before installing this mainboard.
(A) JP1: Power Supply Connector Selection (optional)
This mainboard provides two power connectors to support both the AT and ATX
Switching Power Supply (SPS). JP1 will be used to select the type of SPS. If you
can not find the JP1 on the mainboard, than the mainboard will detect the type of
SPS automatically.
RS
HL
BAT 1
+
-
DIMM 3
DIMM 2
DIMM 1
FDC
IDE 1
IDE 2
1
2
3
1
2
3
AT SPS
ATX SPS
JP 1
