VIA 693/693A AT MAINBOARD
HARDWARE SETUP
3-12
5-b. When this mainboard has the AT power supply connected, According to the
setup in CMOS, the PW connector has two functions. It can be the Reset
button or Suspend Switch of your PC system.(please refer to Section 2-2 and
section 4-7 for BIOS setup)
A.
When the BIOS setup is “Delay 4 sec.”:
The PW switch can be used as a suspend switch. When it is first pressed,
the PC system will be turned into suspend mode, when clicked again, the
PC system will be back to the normal state.
B.
When the BIOS setup is “Instant off”:
The PW switch can be used as a reset button in the PC system. When you
click on this button, the PC system will be reset and restart again.
Note:
When AT type power supply is connected to the mainboard, you may not have to
connect the PW switch to the chassis of your PC system. There is the power
switch on the front panel and it will be connected to the power supply so that you
can use it to power on or power off the PC system.
(Q) Speaker, LED and Key Lock Connector:
RS
HL
BAT 1
+
-
DIMM 3
DIMM 2
DIMM 1
FDC
IDE 1
IDE 2
1 2 3 4 5
1 2 3 4 5
SPK
PWR-LED KBLOCK
Speaker, LED and Key Lock Connector
