VIA 693/693A AT MAINBOARD
HARDWARE SETUP
3-19
(G)
JP100/JP133: FSB Clock adjustment
JP100/JP133 is designed on the board for the purpose when you want to choose
differtne FSB clock. You can use the setting on JP100/JP133 to force the FSB
clock at 66/100/133MHz despite of the CPU type detected by the system BIOS.
RS
HL
BAT 1
+
-
JP100
1
2
3
JP133
1
2
3
Note:
When VIA693 chipset is installed on the mainboard, you will see only JP100 on
the mainboard. Since VIA693 supports 100MHz FSB clock, so you can change
the setting on JP100 to select CPU FSB clock.
When VIA 693A is installed onboard, you will see both JP100 and JP133 on the
board. When you want to select the FSB clock, you will have to make jumper
setting on both JP100 and JP133. Please refer to the following for the settings:
FSB
JP100
JP133
Auto
Pin 1 - Pin 2
Pin 1 - Pin 2
66MHz
Pin 2 - Pin 3
Pin 2 - Pin 3
100MHz
OPEN
Pin 2 - Pin 3
133MHz
OPEN
OPEN
3.4
INSTALLATION OF DEVICE DRIVERS
There is a CD which comes with the mainboard. The CD contains the device
drivers which is necessary when installing the mainboard. Please refer to the
following procedures to install the device drivers.
Step 1. Insert the CD into the CD ROM drive.
Step 2. Change the directory to "\Driver\mainboard\VIA\Pentium II "
Step 3. Run "SETUP.EXE" to install the
device driver.
