Azure Dynamics DMOC445, Руководство по эксплуатации, Страница: 25 / 35

Proprietary
25
DMOC445 Manual and Operating Instructions
2. Electrical Connections
•
To prevent the possibility of
electric shock, switch off the
DMOC completely before connecting or disconnecting any cables.
•
Never pull on the wires or cables in the DMOC harness. The connectors can only be removed by
lifting the retention clip with the small screwdriver and then pulling connector plug out of the
receptacle.
Figure 1. Removing 8-Pin “Comm.” Connector.
3. Connecting the 14-pin, AMP, Motor Sensor
The 14-pin, AMP, Motor Sensor connection allows the DMOC to monitor the speed, direction and
temperature of your motor.
Push the 14-pin, AMP, Motor Sensor Connector into the 14-pin connector port, located to the right of the
35-pin connector port.
4. Connecting the 35-Pin AMP, Vehicle Interface Cable
To connect the 35-Pin AMP, Vehicle Interface Cable to the DMOC, push the connector head into the 35-
Pin connector port, located between the 8-Pin and 14-Pin connector ports.
5. Connecting the 8-pin AMP Connector, Communications
To connect the 8-pin, AMP, Communication (RS232/CAN) Connector to the DMOC, push the connector
head into the 8-Pin connector port, located to the left of the 35-Pin connector port.
Shock
Hazard:
Extreme caution should be used whenever working on or
near the high voltage system.