Azure Dynamics DMOC445, Руководство по эксплуатации, Страница: 16 / 35

Proprietary
16
DMOC445 Manual and Operating Instructions
Table 3. Typical Signal Connector Pin-out.
Pin # Signal: Function:
J6: Primary Control Interface Connector, 35-pin Amp seal
1 KEYED_12V_SRC Keyed-12V and relay power
2 SOC_BUF 12V open-collector gauge drive
3 ACCEL_PEDAL Accelerator pot signal
4 BRAKE_LO Brake pedal pot low
5 GND_A Top Board Gnd
6 PEDAL_LO Accelerator pot low
7 REGEN_DISABLE- Regen brake disable
8 DRIVE_DISABLE- Interlock
9 NONISO_ADIO2 Analog/digital I/O
10 AHC_DATA_- Amp-hour counter input
11 ANAIN3/LED_OVERTEMP Analog input or LED
12 BACKUP_LT_SINK/LED_EMPTY Isolated MOSFET collector or LED
13 KEYED_12V_SINK Keyed-12V and relay power
14 BRAKE_LT_SRC Isolated MOSFET drain
15 POWER_SAVER Power saver potentiometer
16 GND_A Top Board Gnd
17 ANAIN1 Analog input 0-5V
18 REVERSE- Reverse direction
19 GND_D Top Board Gnd
20 GND_D Top Board Gnd
21 GND_A Top Board Gnd
22 AHC_GND Amp-hour counter return
23 BACKUP_LT_SRC/LED_FULL Isolated MOSFET collector or LED
24 BRAKE_LT_SINK Isolated MOSFET collector
25 SPEEDO_BUF 12V open-emitter gauge drive
26 BRAKE_PEDAL Brake pedal pot signal
27 ANAIN0 Analog input 0-5V
28 PEDAL_HI Accelerator pot high
29 FORWARD- Forward direction
30 DRIVE_ENABLE- Interlock
31 NONISO_ADIO1 Analog/digital I/O
32 AH Amp-hour counter input
33 AHC_NEG Amp-hour counter input
34 ANAIN2/LED_MALFN Analog input or LED
35 GND_D Top Board Gnd