User Manual
Page 34
of 40
Static Route.
Allows you to manually define data transmitting paths if
your LAN consists of multiple subnets.
IP QoS Prioritization.
Allows the user to define networking service and
protocol priority.
Port Mapping.
Allows ATM PVCs to be permanently routed to a
physical interface on the device.
Bandwidth Limit.
Allows you to control the amount of bandwidth for
both Egress (outgoing) and Ingress (incoming) data. To configure
bandwidth limit, it is important to enable the Bandwidth Limit
function first by ticking the Bandwidth Limit checkbox.