User Manual
Page 16
of 40
Setup the Device
When installing the modem, find an area where there are enough electrical
outlets for the modem, the main computer, and your other computer
devices. You can refer to the diagram below for further reference while
setting up your device.
To setup the modem:
1.
Plug one end of the Ethernet cable from the modem’s Ethernet port
and plug the other end into the Ethernet port of your computer.
If you have another device you need to connect through wire into the
modem, use another piece of Ethernet cable. Plug one end of the
Ethernet cable from the computer’s Ethernet port and then plug the
other end into an available Ethernet port in the modem.
2.
Plug one end of the telephone cable from the POTS Splitter’s ADSL port
and then plug the other end into the modem’s DSL port.
