Azkoyen VITALE S, Техническая информация

Страница: 23 / 34

1ª 10091 – UK 10 – 2008
23
For machines of 3 buttons:
The number of winkings indicates the code of mistake. (Marked with * in the table) they allow
some of the mistakes to try to do new services; in this case, the lights of the keys are kept
ignited permanently during 10 seconds and during 4 seconds they go out to blink a number of
times that the code of mistake indicates.
Error Number of
winkings
allows service
LOW TEMPERATURE 1
NO WATER 2 *
NO COFFEE GRAIN 3 *
REMOVE AND CLEAN THE TRAY 4 *
LONG EROGATION TIME 5 *
HEATTING ELEMENT ERROR 6
TEMPERATURE SENSOR ERROR 7
NO WATER FOR THE MAINS 8
DOSSER ERROR 9
GROUP POSITION ERROR 10
NO RESIDUETRAY 11
3.4. CONTROL POINTS
Heatting element
Meassured in the control board in the conector jp11
Between pins 1 and 3, will be 220 Vca when heatting element is working. (if 10A fuse is
fine)
Erogation pump
Meassured in the control board in the conector jp10
Between pins 1 and 7 will be 220 Vca when ulka pump is working.
Erogation group motor