User’s Guide
1200URX/AB • 1200URX/VM • 1200URX/Si
1200BT • 1200XT
ENHANCED BROADCAST PERFORMANCE
UHF WIRELESS SYSTEM
Azden Corporation, 147 New Hyde Park Road, P.O. Box 10, Franklin Square, NY 11010
tel - 516.328.7500 • fax - 516.328.7506 • email - [email protected]
© 2008 Azden Corporation
P1030-01
Printed in USA
SPECIFICATIONS
1200URX/AB - 1200URX/Si - 1200URX/VM
RF Carrier Frequency Range
188 steps ~ 638.125 - 661.875 MHz
MicroComputer Controlled PLL Synth.
Noise Reduction
Expander (THAT)
Effective Operating Range
200 - 300 ft ~ 60 - 100m
Frequency Response
50 - 15kHz (
±
1.5dB)
RF Sensitivity (12dB SINAD)
1.2
μμμμμ
V
Adjacent Channel Selectivity
> 70dB (
±
250kHz)
Image Rejection
> 93dB
IF Rejection
> 93dB
Audio THD
< 0.8%
Audio Output
40dBm
±
40kHz Deviation (-20dBm
±
40kHz Deviation for 1200URX\Si)
Output Impedance
600
Ω (
Ω (
Ω (
Ω (
Ω (
300
Ω
Ω
Ω
Ω
Ω
for 1200URX\Si)
Signal/Noise Ratio
> 62dB (
±
5kHz Deviation) “A” Weighted
Power Requirements
11 - 15V DC @ 220mA (10 - 17V DC @ 200mA for 1200URX\Si)
Dimensions
68W x 84H x 18D mm- 1200URX/Si insertion
93W x 119H x 49D mm - 1200URX/AB
82W x 150H x 60D mm - 1200URX/VM
Operating Temperature Range
-50
0
- +122
0
F ~ -10
0
- +50
0
C
Weight
8.8 ounces ~ 250g for 1200URX/Si
15.87ounces ~ 450g for 1200URX/AB
26.45ounces ~ 750g for 1200URX/VM
1200BT
Output Power
25mW
Max Modulation Sensitivity
-4dBm
MIC Level / Imped.
-60dBm / 2.2k
Ω
Ω
Ω
Ω
Ω
(
±
5kHz Deviation)
Power Requirements
3V DC (2 “AA” Alkaline) @ < 150mA
Dimensions
2.48 (W) x 3.86 (H) x 1.12 (D) inches
63 (W) x 98 (H) x 28.5 (D) mm
Weight w/Battery
6.35 ounces ~ 180g
1200XT
Output Power
25mW
Max Modulation Sensitivity
+20dBM ~ 0dBm
MIC Level / Imped. (Dynamic)
-60dBm / 2.2k
Ω
Ω
Ω
Ω
Ω
(
±
5kHz Dev.)
Phantom Power
48V
±2V @ 2mA
Power Requirements
3V DC (2 “AA” Alkaline) @ < 180mA - 290 mA w/Phantom Power ON
Dimensions
1.57 (W) x 4.49 (H) x 1.57 (D) inches
40 (W) x 114 (H) x 40 (D) mm
Weight w/Battery
6.35 ounces ~ 180g
Due to constant improvements, specifications are subject to change without notice.
Licensing
Licensing of this, or any Azden wireless equipment is the user’s responsibility. The ability to receive a license
depends largely on the user’s classification, application and frequency. Contact the appropriate agency (FCC in
the USA) for further information.
