6
3
Powering the 1200BT Transmitter
The 1200BT uses 2 “AA” Alkaline batteries for power. The batteries are
placed in the battery compartment by sliding the battery compartment
door [
k
] down and placing the batteries in the compartment as marked
[
♠
]. DO NOT FORCE THE BATTERIES INTO THE COMPARTMENT.
Azden does not recommend the use of rechargeable batteries.
1
2
4
5
6
3
7
8
9
10
♣
♠
SETTING THE TRANSMITTING FREQUENCY ON THE 1200BT
Before the 1200BT can be used, it and the associated receiver have
to be set to the same frequency. This can be accomplished on the
1200BT transmitter by first setting the LCD display to one of two views
- ‘Frequency’ or ‘Channel’. To do this, after installing fresh batteries,
turn the 1200BT to the ON position [
e
]. Next, using the tip of a ballpoint
pen, an unbent paper clip or something similar, press the MODE but-
ton [
j
] repeatedly until one of the two screens below appears.
The Group selections at the bottom of the chart only apply to the 1200URX/Si
