Azbil MagneW Plus+ MGG14C, Руководство пользователя

Страница: 63 / 110

6-5
Errors experienced with Flow Transducer Block
Error display Corrective action
SENS EX FAILURE
1. Check the connection.
2. Measure the coil’s resistance.
3. Reboot.
SENS NVM FAILURE
1. Reboot.
2. Replace the main P/C.
SENS ADC FAILURE
1. Reboot.
2. Replace the main P/C.
SENS ROM FAILURE
1. Reboot.
2. Replace the main P/C.
SENS RAM FAILURE
1. Reboot.
2. Replace the main P/C.
IO FAILURE
1. Reboot.
2. Replace the main P/C.
3. Replace the Fieldbus option P/C.
AUTO ZERO FAILURE
Check if the measurement piping is empty or if the flow velocity
exceeds 0.2 m/s.
NOT CALIBRATED
1. Reboot.
2. Replace the main P/C.
FLOWTUBE_CONFIG
ERROR
Check the diameter and flowtube, and then enter the correct data.
PVR CONFIG ERROR
PVR exceeds the flow rate equivalent to 10 m/s.
Check the settings of PVR, diameter, flowtube type, and dummy.
SVR CONFIG ERROR
SVR exceeds the flow rate equivalent to 10 m/s.
Check the settings of SVR, diameter, flowtube type, dummy,
and density.
FLSW_1 CONFIG ERROR
flsw_1_threshold exceeds the value of PVR when
flsw_1_source is PV and flsw_1_threshold exceeds the value
of SVR when flsw_1_source is SV. Check the settings of
flsw_1_threshold.
FLSW_2 CONFIG ERROR
flsw_2_threshold exceeds the value of PVR when
flsw_2_source is PV and flsw_2_threshold exceeds the value
of SVR when flsw_2_source is SV. Check the settings of
flsw_2_threshold.
Errors experienced with Diag Transducer Block
Error display Corrective action
PARA_ERROR
scale_level_hysteresis exceeds
scale_level_threshold. Check the settings of
scale_level_threshold.
SENSOR_ERROR
A sensor error has occurred.
Check BLOCK_ERR_DESC in Flow Transducer Block.