AB-6580
6
I/O module
Item Wiring Wiring
length
Temperature input
JIS IV, JIS CVV, KPEV
®
*
1.25 mm
2
100 m
Voltage/Current input
JIS IV, JIS CVV, KPEV
®
1.25 mm
2
100 m
Voltage/Current output
JIS IV, JIS CVV, KPEV
®
0.9 mm
2
, 1.25mm
2
100 m
Modutrol motor output
JIS IV, JIS CVV, KPEV
®
1.25 mm
2
100 m
Digital input
JIS IV, JIS CVV, KPEV
®
0.5 mm
2
, 0.75 mm
2
, 0.9 mm
2
, 1.25 mm
2
100 m
Relay output
JIS IV, JIS CVV, KPEV
®
1.25 mm
2
100 m
Remote control relay
output
JIS IV, JIS CVV, KPEV
®
1.25 mm
2
100 m
Notes:
∗
Since a quick-fit screwless terminal block is provided on I/O modules, the wires can be connected only by stripping the sheath.
Sheath stripped length: 8 mm (Pin terminal cannot be used.)
∗
KPEV is a wiring standard provided by Furukawa Electric Co., Ltd.
Specifications of I/O modules, user interface modules, and Operator Panel
For the specifications of I/O modules and user interface modules, refer to Specifications/Instructions of Model RY50XX
(AB-6527). For the specifications of Operator Panel (integral type / panel mount type), refer to Specifications/Instructions of
Model RY5001Q/QY5100W (AB-6546).
CE Marking Conformity
This product must be installed in a panel cabinet. Besides, the product in the panel cabinet must be out of reach of unauthorized
people who are not well-trained for electric facilities.
This product complies with the following Electromagnetic Compatibility (EMC) and the Low Voltage Directive (LVD).
EMC : EN61326-1
Class A, Table 2 (For use in an industrial electromagnetic environment)
LVD : EN61010-1
Overvoltage category II
Pollution degree 2
Input/Output Terminal Arrangement
RJ-45
modular
connector
LC-bus
Figure 3. Input/output terminal arrangement
∼
1
2
3
4
CONF.
IN
OUT
100-240 V AC
