■
Wiring Precautions
Be sure to use crimped terminals for wiring terminals.
When wiring is finished, check the connections for any
miswiring before turning the power ON.
■
Connecting the Power Supply
Connect the power terminal as follows:
The power supply unit must be a UL approved Class 2 power
supply unit or Class 2 transformer in order to apply UL.
Handling Precautions
• Power is mutually connected between linked
modules.
• Supply power to one of the linked modules.
• Select a power supply that can cover the total
power consumption of all linked modules.
• Use of free terminal (3) is prohibited.
Do not use this terminal, for example, for wiring
relays.
■
Connecting CPL communications
CPL communications (RS-485) is performed using a 3-
lead connection.
Ex : Connection with a 5-lead device
Handling Precautions
• Do not connect an external terminator as the
DMC10E has a built-in resistor equivalent to a
terminator.
• Be sure to connect SG terminals each other.
Failure to do so might cause unstable
communications.
■
Specifications
* For details refer to the Distributed Multi-channel
controller DMC10 User's Manual (Description of
Functions Version) CP-UM-5143E.
1
2
3
+ -
24Vdc
Do not use
14
Extended event
(CH2)
15
11
Extended event
(CH1)
12
13
NO
NC
16
Extended event
(CH3)
17
18
NO
NC
19
Extended event
(CH4)
20
11
12
13
14
15
16
17
18
19
20
NO: Normally Open (Open)
NC: Normally Close (Close)
E3
4. Wiring
5. Specificathions
Item
Specifications
Extended
Number of
4
event output
points
Output rating
Output type
: Relay contact output
Contact type : SPST/2, SPDT/2
Contact rating : 250Vac, 1A
30Vdc, 1A
Life
: Min. 100,000 operations
(resistive load)
Min. switching specification: 5V, 10mA
Type of action Type of action on DMC10*
The type of action can be enabled
by setting to bus event output on the
DMC10.*
Optional
The same bus event output of each
functions
DMC10 is ORed.*
General
Rated power
24Vdc
specifications voltage
Power
Max. 3W (in operating state)
consumption
Insulation
Across primary and secondary sides:
resistance
Min. 500Vdc 20M
Ω
Dielectric
Across primary and secondary sides:
strength
1500Vac 1min
Power ON
Max. 10A
rush current
Case, base
Polycarbonate/light gray
material/color
(munsell: 2.5Y7.5/1 or equivalent)
Operating
Ambient temperature : 0 to 50
˚
C
conditions
Ambient humidity
: 10
˚
to 90%RH
Power voltage
: 21.6 to 26.4Vdc
Vibration resistance : 0 to 2m/s
2
(10 to 60Hz, for 2h each in X, Y and
Z directions)
Impact resistance
: 10m/s
2
Mounting angle
:
10
˚
of reference plane
Transport/
Ambient temperature : -20 to +70
˚
C
storage
Ambient humidity
: 10
˚
to 95%RH
conditions
(condensation not allowed)
Vibration resistance : 0 to 5m/s
2
(10 to 60Hz, for 2h each in X, Y and
Z directions)
Impact resistance
: 392m/s
2
(screw mount)
196m/s
2
(DIN rail mount)
Package drop test : Drop height 60cm
(free fall on one corner, three sides
and six surfaces)
Mass
Max.200g
