Thank you for purchasing the DMC10E Distributed
Multi-channel Controller.
This manual describes only precautions for ensuring
correct use of the DMC10E Distributed Multi-channel
controller, specifications and wiring.
Be sure to keep this manual nearby for handy
reference.
For further details on correct use, read the DMC10
Distributed Multi-channel controller User's Manual
(Description of Functions Version)
CP-SP-1057E.
CP-UM-5131JE
DMC10E
Distributed Multi-channel Controller
User's Manual
E1
Make sure that this User's Manual is handed over to the
user before the product is used.
Copying or duplicating this User's Manual in part or in
whole is forbidden. The information and specifications in
this User's Manual are subject to change without notice.
Considerable effort has been made to ensure that this
User's Manual is free from inaccuracies and omissions.
If you should find any inaccuracies or omissions, please
contact Yamatake Corporation.
In no event is Yamatake Corporation liable to anyone for
any indirect, special or consequential damages as a
result of using this product.
REQUEST
2000 Yamatake Corporation ALL RIGHTS RESERVED
Safety precautions are for ensuring safe and correct
use of this product, and for preventing injury to the
operator and other people or damage to property.
You must observe these safety precautions. Also, be
sure to read and understand the content of this
user's manual.
CAUTION
Cautions are indicated when mishandling this
product might result in minor injury to the user, or
only physical damage to this product.
SAFETY PRECAUTIONS
CAUTION
•
Before wiring or installing the DMC10E, be sure to turn the
power OFF.
Failure to do so might cause the DMC10E to malfunction.
•
Do not disassemble the DMC10E.
Doing so might cause faulty operation.
•
Use the DMC10E within the operating ranges (temperature,
humidity, vibration, shock, mounting direction, atmosphere,
etc.) recommended in the specifications.
Failure to do so might cause fire or faulty operation.
•
Do not block ventilation holes.
Doing so might cause fire or faulty operation.
•
Wire the DMC10E properly according to predetermined
standards.
Also wire the DMC10E using designated power leads according
to recognized installation methods.
Failure to do so might cause electric shock, fire or faulty
operation.
•
Do not allow lead clippings, chips or water to enter the DMC10E
case. Doing so might cause fire or faulty operation.
•
Firmly tighten the terminal screws at the torque listed in the
specifications.
Insufficient tightening of terminal screws might cause fire.
•
Do not use unused terminals on the DMC10E as relay terminals.
Doing so might cause electric shock, fire or faulty operation.
•
Use Yamatake Corporation's SurgeNon if there is the risk of
power surges caused by lightning.
Failure to do so might cause fire or faulty operation.
•
When disposing of the DMC10E, dispose of it appropriately as
industrial waste in accordance with local bylaws and
regulations.
•
Use the relay on the DMC10E within the rated life described in
the specifications. Continued use of the DMC10E outside of the
rated life might cause fire or faulty operation.
•
The DMC10E will not function for about ten seconds after
turning the power ON. Pay attention to this when using the
relay output from the DMC10E as an interlock signal.
•
Prevent the total power consumption of all linked modules from
exceeding 100W.
Failure to do so might cause fire or faulty operation.
•
Do not supply power from two or more lines to all linked
modules.
Doing so might cause fire or faulty operation.
•
Connect only one DMC10E to all linked modules.
Failure to do so might cause the DMC10E to malfunction.
•
Connect only one DMC10E to all linked modules.
Failure to do so might cause the DMC10E to malfunction.
RESTRICTIONS ON USE
This product has been designed, developed and
manufactured for general-purpose application in
machinery and equipment.
Accordingly, when used in applications outlined
below, special care should be taken to implement a
fail-safe and/or redundant design concept as well as
a periodic maintenance program.
• Safety devices for plant worker protection
• Start/stop control devices for transportation and
material handling machines
• Aeronautical/aerospace machines
• Control devices for nuclear reactors
Never use this product in applications where human
safety may be put at risk.
