manualshive.com logo in svg

Azbil dcp551 mark II, Руководство пользователя

Поделиться
Скачать
Azbil dcp551 mark II Скачать руководство пользователя страница 148

8-8

●

When the event is a time event

(1) In the set value display state, move to the event item to be set for the segment

on the programming map.

(2) Press the 

ENTER key

to make display panel 1 flash (registration of first

setting).

(3) Use 

the , ,  , 

and 

keys

to make the first setting (On Time setting).

Setting range: 0:00 to 500:00, 0.0 to 3000.0
(Time units are selected using setup data 

C62

to set Hour/min, Min/sec, 0.1

sec. Since a colon “:” cannot be displayed, the decimal point is used instead.)

(4) Press the 

ENTER key

to stop the flashing on display panel 1 and display

panel 2 starts flashing. (Start of second setting)
(Pressing the 

FUNC

and 

CLR keys

causes display panel 1 and 2 to return to

unset state “-----” and the flashing stops.)

(5) Use 

the , ,  , 

and 

keys

to make the second setting (Off Time

setting).
Setting range: On time s0:01 to 500:00, Off time s0.1 to
3000.0

(6) Press the 

ENTER key

to stop the flashing on display panel 2.

(Pressing the 

FUNC

and 

CLR keys

causes display panel 2 to return to unset

state “-----” and the flashing stops.)

●

Display (time event)

• Unset values are indicated as “-----”.
• When the On Time is set to 500:00 or 3000.0, an Off Time cannot be set.

NOTE

A time event setting consists of one setting, an On Time, or two settings, an On
Time and an Off Time. When both settings are made a subfunction can be used. In
unset state “-----” a subfunction cannot be used.

Handling Precautions

In a time event, an On Time or Off Time setting that is the same as or
exceeds the segment time is invalid.
Note, however, that when there is a G.SOAK wait at the end of a segment
or an END mode at the end of a program, an On Time or Off Time setting
that is the same as the segment time is valid.

PROG

SEG

PROFILE

Program 
number

Segment
 number

On Time setting

Pattern trend

Event number
Event type

Off Time setting

Chapter 8. PROGRAM SETUP

Содержание dcp551 mark II





























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды