Ayrton wildsun k25, Руководство пользователя

Страница: 9 / 18

USER MANUAL _
9
Test
Home All
Pan&Tilt Reset all motors
Reset Pan&Tilt
Test Channel PAN …… Test function
Manual Ctrl. PAN =XXX
: Fine adjustment of
parameters
Calibration --Password--
PAN
: Password “050”
Calbrate and adjust the
effects to standard/right
position
Preset
Select Prog. Prog. Part 1 = Program 1 ~ 10 Program 1
Prog. Part 2 = Program 1 ~ 10 Program 2
Prog. Part 3 = Program 1 ~ 10 Program 3 Select programs to be run
Edit Prog. Program 1
:
Program 10 Program Test
Step 01=SCxxx
Step 64=SCxxx Testing program
Program in loop
Save and exit
Edit Scenes Edit Scene 001
~ Edit Scene 250 Pan,Tilt,……
--Fade Time--
--Secne Time--
Input By Outside Save and automatically
return
manual scenes edit
Scenes Input XX~XX Automat. scenes rec
WILDSUN K25 CONTROL PANEL MENU – OPTION
DETAILS
The following section provides details on the options that can be selected
through the control panel menu. Refer to the table above.
Note: You can exit this menu at any time by pressing “Mode Esc” repeatedly
until you return to the home screen.
ADDRESS
Allows you to change a DMX address from the fixture’s control panel.
w
Access the menu by pressing the “Mode Esc” key.
w Go to the “ADDRESS” menu and press “Enter”, then find “Set DMX
Address.”
w Use the up/down arrows to scroll through until you locate the desired
address and press “Enter” to confirm.
MODE
USERS MODE
Allows you to select the DMX mode from the following: “Basic Mode” (11
DMX channels ), “Standard Mode” (14 DMX channels), “Extended Mode”
(21 DMX channels), “User Mode A”, “User Mode B”, “User Mode C.”
w Access the menu by pressing the “Mode Esc” key.
w Use the up/down arrow keys to reach the “MODE” menu and press
“Enter.” Then from “User Mode” choose one of the 6 modes above.
Consult the “CHART DMX” table for more information on Basic, Standard
and Extended Mode. “User Modes A”, “B”, or “C” are user-definable.
EDIT USER A, B, C
To customize the mode, go to “MODE” and select “Edit UserMode A, B or
C” and press “Enter.” Scroll through each setting and press “Enter” to set
the desired address.
OPTIONS
STATUS
No DMX Mode
Defines the fixture’s state when there is no command signal from the DMX
controller. The fixture can either launch a program automatically, close the
shutter, or even remain in the state when the last DMX values (Hold) were
received. The default setting is “Hold.”
w Access the menu by pressing the “Mode Esc” key.
w Use the up/down arrow keys to reach the “OPTION” menu and press
“Enter.” Then use the left/right arrow keys to select “Status.” Finally, use
the left/right arrow keys to select “No DMX Mode.”
w Scroll through the different options using the left/right arrows and press
“Enter” to confirm.
Pan Reverse
Reverses the PAN movement.
w
Access the menu by pressing the “Mode Esc” key.
w
Use the up/down arrow keys to reach the “OPTION” menu and press
“Enter.” Then use the left/right arrow keys to select “Status.” Finally, use
the left/right arrow keys to select “Pan Reverse.”
w Scroll through the different options using the left/right arrows and press
“Enter” to confirm.
Tilt Reverse
Reverses the direction of the TILT movement.
w Access the menu by pressing the “Mode Esc” key.
w Use the up/down arrow keys to reach the “OPTION” menu and press
“Enter.” Then use the left/right arrow keys to select “Status.” Finally, use
the left/right arrow keys to select “Tilt Reverse.”
w
Scroll through the different options using the left/right arrows and press
“Enter” to confirm.
Pan Degree
Adjusts the amplitude of the PAN movement at 630° or 540°.
w Access the menu by pressing the “Mode Esc” key.
w Use the up/down arrow keys to reach the “OPTION” menu and press
“Enter.” Then use the left/right arrow keys to select “Status.” Finally, use
the left/right arrow keys to select “Pan Degree.”
w Scroll through the different options using the left/right arrows and press
“Enter” to confirm.
Feedback
Readjusts the PAN and TILT positions automatically in the event of
accidental shifting due to a physical shock.
w
Access the menu by pressing the “Mode Esc” key.
w
Use the up/down arrow keys to reach the “OPTION” menu and press
“Enter.” Then use the left/right arrow keys to select “Status.” Finally, use
the left/right arrow keys to select “Feedback.”
w Scroll through the different options using the left/right arrows and press
“Enter” to confirm.
Pan/Tilt Spd
You can choose between four movement speeds, from “Speed 1” to
“Speed 4.” The “Speed 1” setting is the fastest.
w Access the menu by pressing the “Mode Esc” key.
w Use the up/down arrow keys to reach the “OPTION” menu and press
“Enter.” Then use the left/right arrow keys to select “Status.” Finally, use
the left/right arrow keys to select “Pan/Tilt Spd.”
w
Scroll through the different options using the left/right arrows and press
“Enter” to confirm.
Hibernation — Standby mode
The LEDs and the pan/tilt motors will be powered down if the luminaire
receives no DMX signal for several minutes (default setting is OFF). If the
DMX signal is restored after this time limit, the luminaire will perform a
RESET before resuming normal operation.