Ayrton wildsun k25, Руководство пользователя

Страница: 4 / 18

USER MANUAL _
4
INTRODUCTION
Thank you for selecting the AYRTON WILDSUN K25 luminaire.
WARNING !
This product is not suitable for household use.
You now own a professional lighting unit that offers endless possibilities.
Before installing, make sure that no damage was done to your luminaire
during transport. If this is the case, do not use the product and immediately
contact your authorized AYRTON dealer.
For your own safety and that of others, please read this instruction manual
carefully before installing the unit.
Anyone involved in installing, operating or servicing the WILDSUN K25
must:
• Be a qualified, authorized professional
• Strictly follow the instructions in this user manual.
Please take the time to read this manual carefully and thoroughly before
installing and operating the luminaire. You should have a good knowledge
of its operating conditions and all pertinent product information.
After you have become familiar with this manual, we recommend that
you keep a copy for future use. All the information found in this manual
is subject to change without notice. AYRTON reserves the right to modify
and upgrade its range of products, with no obligation to integrate these
changes into products already sold.
SAFETY INSTRUCTIONS
Please read the safety instructions and warnings in this manual carefully
before installing and operating the WILDSUN K25.
WARNING!
Risk of electric shock.
Use caution when handling. This luminaire requires high voltage,
which can result in electric shock.
The WILDSUN K25 left our factory in perfect working condition. However,
if you notice a defect, immediately contact your authorized AYRTON dealer
before use. The manufacturer cannot be held responsible for damages
caused by a failure to follow the safety, installation or assembly instructions
contained herein, or by any modification made to the luminaire.
Failure to observe the safety, installation or assembly instructions
contained herein, or any modification made to the WILDSUN K25 luminaire
will render the warranty null and void.
Check that the supply voltage does not exceed the maximum authorized
limit. Check that your electrical installation complies with current standards.
In all cases, make sure that the power cables attached to your WILDSUN
K25 have not been damaged due to cuts and splices or crushed in any
way. Handle these cables with extreme caution while they are connected
to a power source.
Your WILDSUN K25 conforms to Class 1 safety standards. The unit must
be grounded electrically. Make sure that the power source connected to
your WILDSUN K25 is switched off before attempting any work on it.
Installation and connection to an electrical source must be performed
by an authorized installer. AYRTON declines all responsibility should this
luminaire be installed by an unqualified person.
Never disconnect your WILDSUN K25 by pulling on the power cable!
First unlock the connector lock ring on the power cable until it is fully
disengaged, and then gently pull on the connector to disconnect the cable.
Do not connect or disconnect the power cable of your WILDSUN K25 with
wet hands.
At first use, your WILDSUN K25 may give off an odor. This is a normal
occurrence that should dissipate after a few minutes of operation.
WARNING!
Do not connect or disconnect the power cable at your WILDSUN K25
if the cable is energized! This could cause arcing and damage your
WILDSUN K25, requiring repair.
Be careful to power off your COSMOPIX-R by removing the power plug
from the source, before connecting or disconnecting the luminaire.
WARNING!
This unit contains Class 2 LED emitters (EN60625-1): 1994)
This luminaire uses multiple high-power (Class 2) LED-type (Light Emitting
Diode) lamps. Never look directly into the lamps if lit or stand directly in
line with the luminaire if close by.
Installation, removal or replacement of the unit must be performed with
power off to prevent any risk of glare and eye injury.
WARNING!
The fixture quickly becomes very hot during operation.
To avoid risk of burn, never handle or adjust the luminaire while it is
energized and after it has been lit for more than 10 consecutive minutes.
Some parts of the luminaire can reach a high temperature, particularly the
body/radiator. Turn off the luminaire and wait for it to cool before handling.
CONDITIONS OF USE
Your WILDSUN K25 is a moving-head luminaire equipped with multiple
LEDs intended for professional use (e.g., architectural, stage, television,
theater, or museum lighting).
The WILDSUN K25 luminaire has an IP20 protection rating. It is intended
strictly for indoor use. It must never be partially or fully submerged, even
temporarily.