Ayrton MagicBlade R, Руководство пользователя

Страница: 16 / 20

USER MANUAL _
16
DMX channel´s functions and their values (44 DMX channels)
Mode/Channel Value Function
St Ba Ex
15 13 11
Color Presets:
165-169 Rainbow13
170-174 Rainbow14
175-179
Rainbow15
180-184 Rainbow16
185-189
Rainbow17
190-194 Rainbow18
195-199 Rainbow19
200-255
Reserved
19 17 15
Color Presets Dimmer:
0-255 Dimmer 100 to 0%
16 14 12
Chase Patterns:
1--14 Led trun off
15-30
Chase 1
31-46 Chase 2
47-62 Chase 3
63-78 Chase 4
79-94 Chase 5
95-110
Chase 6
111-126 Chase 7
127-142 Chase 8
143-158 Chase 9
159-174 Chase 10
175-190
Chase 11
191-206 Chase 12
207-222 Chase 13
223-238 Chase 14
239-255 Chase 15
17 15 13
Chase Speed:
0-125 Fast to Slow Backward
126-130 Stop(Speed=0)
131-255 Slow to Fast Forward
18 16 14
Chase Fade:
0-255
Fade Chase
20 18 16
Reset, internal programs:
0-79 Normal
80-84 All motor reset
85-87 Scan motor reset
88-90
no function
91-93 no function
94-96 no function
97-99 no function
100-119 Internal program 1 (secne1~8 of EEPROM)
120-139
Internal program 2 (secne9~16 of EEPROM)
140-159 Internal program 3 (secne17~24 of EEPROM)
160-179 Internal program 4 (secne25~32 of EEPROM)
180-199 Internal program 5 (secne33~40 of EEPROM)
200-219 Internal program 6 (secne41~48 of EEPROM)
220-239
Internal program 7 (secne49~56 of EEPROM)
240-255 Music Control (secne of Program 1)
Error mESSAGES
When you turn on the MAGICBLADE-R, it will first perform an automatic
reset. The display may show “Err channel is XX” indicating there is
a problem with one or more of the channels. “XX” represents channel
1, 2, 3, 4, 5 or 6, which contain the testing sensor for positioning. For
example, the message, “Err channel is Red LED -all arrays”, indicates an
error in channel 1. If there is an error on channel 1 and channel 3 at the
same time, the following error message may appear: “Err channel is Pan
movement”, “Err channel is Tilt movement”. The system will flash twice,
and the fixture will generate a second reset. If the error message persists
after more than two resets, the channels showing errors will not work
properly but the other channels will function normally.
Please contact your authorized dealer or manufacturer for service and do
not attempt to repair the luminaire yourself.
PAN- movement Er
(PAN-yoke movement error): This message will appear after the reset
if the yoke’s magnetic-indexing circuit malfunctions (failed sensor or
magnet missing) or the stepping-motor is defective (also caused by its
driving IC on the main PCB). The PAN- movement does not return to the
default position after the reset.
TILT- movement Er
(TILT-head movement error): This message will appear after the reset
if the head’s magnetic-indexing circuit malfunctions (sensor failed or
magnet missing) or the stepping-motor is defective (also caused by its
driving IC on the main PCB). The TILT- movement does not return to the
default position after the reset.
cArE And mAIntEnAncE
The care and maintenance of your MAGICBLADE-R should be ensured
by a qualified technician. Your MAGICBLADE-R requires regular servicing.
The frequency depends essentially on its operating conditions and
environment. Intensive use in a dusty environment, or a lack of ventilation
around the fixture, may disrupt operation, result in overheating and cause
damage that is not covered by the warranty.
WArnInG!
Disconnect from mains before servicing.
UPDATING THE LUMINAIRE
Ayrton is continually upgrading this product line. It is therefore possible
that a new software version is available that will increase the unit’s
capabilities.
Updates are performed using Ayrton’s update box. Contact your dealer for
more information.
To display the version of your , go into the “Info” menu and select “Software
version” (see options details under the “INFO” menu). It is advisable to use
the same software version for multiple fixtures.