Ayrton MagicBlade R, Руководство пользователя, Страница: 5 / 20

USER MANUAL _
5
temporarily.
Condensation may form on your MAGICBLADE-R in the following cases:
• Immediately after turning on the heating
• In places with fog or a high level of humidity
• When the luminaire is suddenly moved from a cold to a warm
environment, or vice versa.
In such cases, you must wait until the luminaire readjusts to the ambient
temperature of the room where it will be installed for operation.
Do not shake the MAGICBLADE-R while installing or handling.
Do not by pull the MAGICBLADE-R by one of its cables to move it. Lift the
luminaire by its handles.
Choosing the appropriate place to install the MAGICBLADE-R is essential.
The following points should be observed:
• Do not expose it to a heat source.
• Do not install it near flammable materials.
• Be sure that dust or miscellaneous debris cannot clump around the
body of the luminaire as this may interfere with its optimal cooling and
proper operation.
• The MAGICBLADE-R must be installed out of reach of the public and all
persons not authorized to operate the luminaire.
We recommend a minimum distance of 20 cm between the outside
surface of the light and the illuminated object. The color mixture of the
MAGICBLADE-R can be improved if the illuminated surface is very close
to the luminaire (up to about 50 cm).
Due to the nature of its cooling principle, you should never prevent air
from circulating around the body of the luminaire. You must provide a
minimum clearance of 20 cm around your MAGICBLADE-R to allow for
cooling.
The MAGICBLADE-R can be installed in a ground pit or any other confined
enclosure only under certain conditions. With this kind of installation, a
system of forced ventilation should be used up to allow air to circulate
freely around the luminaire(s). The air must be constantly renewed
because the luminaire cannot be operated in closed system. Failure to
comply with these requirements may destroy or prematurely wear the
MAGICBLADE-R, and AYRTON cannot be held responsible. Please consult
your AYRTON dealer for more information on this type of installation.
No load should be placed on the MAGICBLADE-R. The fixture must not be
installed in such a way as to allow a person, vehicle or any object to run
over or park on it.
Never lay or drop any hard, heavy, or blunt, objects on the MAGICBLADE-R.
This includes items made of glass or porcelain (e.g., bottles, dishware,
or glass beads). The luminaire is made of materials such as plastic and
extruded aluminum, making it resistant but not unbreakable. Objects
made of hard materials such as steel or glass that fall on the unit may
cause breakage of the plastic parts or the body. AYRTON cannot be held
responsible for the luminaire’s broken plastic parts or body, which are not
covered under warranty.
The temperature of the room where the MAGICBLADE-R is installed must
never exceed 45°C (Ta = 45°C).
The MAGICBLADE-R luminaire requires a 110-240 VAC supply voltage.
Check that your luminaires have been installed for an application that is
compatible with this information.
Check that the bracket on which you hang or attach your MAGICBLADE-R
can sustain the weight of the luminaire (12 kg), taking into consideration
all necessary safety factors.
Do not use your MAGICBLADE-R before being familiar with these
recommendations and do not allow unqualified personnel to handle the
product.
To transport your MAGICBLADE-R, we strongly recommend that you use
the complete original packaging, including the dense protective foam
inserts.
If your 602 MAGICPANEL is not being used for a long period, you should
disconnect the luminaire from the power source.
Never dispose of the MAGICBLADE-R in a rubbish bin. Ensure that it is
recycled. Please consult the current legislation in your country on recycling
electronic equipment.
WArnInG!
The number of daisy chain, or tandem, connections to the
MAGICBLADE-R (power input and output sockets on the luminaires)
is limited for safety reasons. The maximum authorized number of
connections is as follows, with the power line protected by a 10A
circuit breaker:
16 MAGICBLADE-R units on the same source at 230 VAC or
6 MAGICBLADE-R units on the same source at 110 VAC.
PrESEntAtIon And FEAturES
MAGICBLADE-R is a non-waterproof moving head wash light (IP20
protection rating) using the latest generation of high-performance of LED-
type lamps.
This luminaire can be controlled remotely by an external DMX512 signal.
The MAGICBLADE-R incorporates multi-chip LEDs using 4 colors: Red,
green, blue and white.
This color-light luminaire operates on the CMY additive color principle and
along with white light can potentially render a palette of 4.2 billion colors.
The MAGICBLADE-R has a total of 7 LEDs that can be controlled
independently. The luminaire requires from 18 to 44 DMX channels to be
controlled via an external command system that sends a DMX512 signal
(see below for details).
To adjust the settings on the MAGICBLADE-R (i.e., DMX address, DMX
operating mode and other options), a Remote Device Management
(RDM)-type DMX controller may be required. The DMX RDM protocol is a
universal, widely used standard.
There are a multitude of RDM DMX controllers on the market from different
manufacturers (excluding AYRTON). It is worth noting that an RDM DMX
controller is not required to change the settings on the MAGICBLADE-R. A
light console or any standard DMX-type controller is sufficient.