background image

USER MANUAL

 _

 16

DMX channel´s functions and their values (272 DMX channels)

Mode/Channel

Value

Function

St

Ba

Ex

A16

A14

A12

222-223

Chase 107

224-225

Chase 108

226-227

Chase 109

228-229

Chase 110

230-231

Chase 111

232-233

Chase 112

234-235

Chase 113

236-235

Reserved

A17

A15

A13

 

Chase Speed:

0-125

Fast to Slow Backward

126-130

Stop(Speed=0)

131-255

Slow to Fast Forward

A18

A16

A14

 

Chase Fade:

0-255

Fade Chase

A20

A18

A16

 

Reset, internal programs:

0-79

Normal 

80-84

All  motor reset

85-87

Scan motor reset

88-90

no function

91-93

no function

94-96

no function

97-99

no function

100-119

Internal program 1 (secne1~8 of EEPROM)

120-139

Internal program 2 (secne9~16 of EEPROM)

140-159

Internal program 3 (secne17~24 of EEPROM)

160-179

Internal program 4 (secne25~32 of EEPROM)

180-199

Internal program 5 (secne33~40 of EEPROM)

200-219

Internal program 6 (secne41~48 of EEPROM)

220-239

Internal program 7 (secne49~56 of EEPROM)

240-255

Internal program 8 (secne57~64 of EEPROM)

ERROR MESSAGES

When you turn on the DREAMPANEL TWIN, it will first perform an 
automatic reset. The display may show “Err channel is XX” indicating there 
is a problem with one or more of the channels. “XX” represents channel 
1, 2, 3, 4, 5 or 6, which contain the testing sensor for positioning. For 
example, the message, “Err channel is Red LED -all arrays”, indicates an 
error in channel 1. If there is an error on channel 1 and channel 3 at the 
same time, the following error message may appear: “Err channel is Pan 
movement”, “Err channel is Tilt movement”. The system will flash twice, 
and the fixture will generate a second reset. If the error message persists 
after more than two resets, the channels showing errors will not work 
properly but the other channels will function normally. 

Please contact your authorized dealer or manufacturer for service and do 
not attempt to repair the luminaire yourself.

PAN- MOVEMENT ER

(PAN-yoke movement error): This message will appear after the reset 
if the yoke’s magnetic-indexing circuit malfunctions (failed sensor or 

magnet missing) or the stepping-motor is defective (also caused by its 
driving IC on the main PCB). The PAN- movement does not return to the 
default position after the reset.

CARE AND MAINTENANCE

The care and maintenance of your DREAMPANEL TWIN should be ensured 
by a qualified technician. Your DREAMPANEL TWIN requires regular 
servicing. The frequency depends essentially on its operating conditions 
and environment. Intensive use in a dusty environment, or a lack of 
ventilation around the fixture, may disrupt operation, result in overheating 
and cause damage that is not covered by the warranty.

WARNING!

Disconnect from mains before servicing.

UPDATING THE LUMINAIRE

Ayrton is continually upgrading this product line. It is therefore possible 
that a new software version is available that will increase the unit’s 
capabilities. 

Updates are performed using Ayrton’s update box. Contact your dealer for 
more information.

To display the version of your device, go into the “Info” menu and select 
“Software version” (see options details under the “INFO” menu). It is 
advisable to use the same software version for multiple fixtures.

CLEANING

Your DREAMPANEL TWIN requires cleaning at regular intervals. Be aware 
that accumulated dust and residue on the air vents, body and glass of the 
fixture may reduce efficiency and impair proper operation.

Before cleaning, disconnect the power cable from source.

Use compressed air to blow away dust particles accumulated on and 
between the cooling fins at the rear of the luminaire’s optical system.

Clean the glass of the fixture with a slightly damp soft cloth. When 
necessary, use a non-alcohol-based glass cleaner. Never use harsh 
solvents!

WARNING!

Never use alcohol or any chemical agent to clean the optical system

of an Ayrton product.

COMPLIANCE CHECK 

 

• Your installation should be checked regularly by certified service center. 

 

• In addition, the following should be checked once a year by a qualified 

technician:

 

• The fixture’s attachment system must be correctly installed and show 

no sign of corrosion.

 

•  The fixture’s mounting bracket should not be distorted in any way or 

show any trace of corrosion.

 

•  The safety cable should be attached at the appropriate spot.

Содержание DREAMPANEL TWIN




















Отзывы: