Ayrton DREAMPANEL TWIN, Руководство пользователя

Страница: 11 / 19

USER MANUAL _
11
Key Lock
Activates the automatic keypad lock. If this function is enabled, the keys
will be automatically locked 15 seconds after exiting edit mode. Hold the
MENU key down for 3 seconds to deactivate this function.
w “Mode Esc” key.
w Use the up/down arrow keys to reach the “OPTION” menu and press
“Enter.” Then use the left/right arrow keys to select “Disp. Setting.”
Finally, use the left/right arrow keys to select “Key Lock.”
w
Use the left/right arrow keys to select ON or OFF. Press “Enter” to
confirm.
DispFlash
Causes the display to flash as a warning that there is no DMX signal.
w
Access the menu by pressing the “Mode Esc” key.
w Use the up/down arrow keys to reach the “OPTION” menu and press
“Enter.” Then use the left/right arrow keys to access the “Disp. Setting”
submenu. Finally, use the left/right arrow keys to select “DispFlash.”
w Use the left/right arrow keys to select ON or OFF. Press “Enter” to
confirm
SIGNAL SELECT
This menu allows you to choose what type of signal is used to control the
fixture (Art-Net or sACN).
w
Access the menu by pressing the “Mode Esc” key.
w
Use the up/down arrow keys to reach the “OPTION” menu and press
“Enter.” Then use the left/right arrow keys to select “Signal Select”
submenu.
w
Use the left/right arrow keys to select the signal type used. Press “Enter”
to confirm
TEMP. C/F
Allows you to select the unit of measurement for the temperature values,
in either Celsius or Fahrenheit.
w Access the menu by pressing the “Mode Esc” key.
w Use the up/down arrow keys to reach the “OPTION” menu and press
“Enter.” Then use the left/right arrow keys to access the “Temp. C/F”
submenu.
w Use the left/right arrow keys to select the unit of measurement. Press
“Enter” to confirm.
INITIAL POS.
Controls the initial position of the fixture’s effects.
w
Access the menu by pressing the “Mode Esc” key.
w
Use the up/down arrow keys to reach the “OPTION” menu and press
“Enter.” Then use the left/right arrow keys to access the “Initial Pos”
submenu.
w Use the left/right arrow keys to select the desired setting, press “Enter”,
and use the left/right arrow keys to change the value. Press “Enter” to
confirm.
TRIGGER
DMX Value Disp.
Allows you to view the DMX value received for each setting. The “ALL”
option will display only the setting being edited.
w
Access the menu by pressing the “Mode Esc” key.
w
Use the up/down arrow keys to reach the “OPTION” menu and press
“Enter.” Then use the left/right arrow keys to access the “Trigger”
submenu. Use the right/left arrow keys to select “DMX value Disp.”
w
Use the left/right arrow keys to select which setting to display. Press
“Enter” to confirm.
Set To Slave
Sets the fixture to SLAVE Mode for receiving instructions from a master
luminaire (see Master/Save mode settings, below).
w Access the menu by pressing the “Mode Esc” key.
w Use the up/down arrow keys to reach the “OPTION” menu and press
“Enter.” Then use the left/right arrow keys to access the “Trigger”
submenu. Use the right/left arrow keys to select “Set To Slave.”
w Use the right/left arrow keys to define whether the fixture is Slave 1,
Slave 2 or Slave 3, accordingly. Press “Enter” to confirm.
Auto Program
Allows you to run an internal program (a sequence of scenes) by selecting
whether the fixture is operating alone or as a master.
w
Access the menu by pressing the “Mode Esc” key.
w Use the up/down arrow keys to reach the “OPTION” menu and press
“Enter.” Then use the left/right arrow keys to access the “Trigger”
submenu. Use the right/left arrow keys to select “Auto Program.”
w Use the right/left arrow keys to select whether the fixture is “Alone” or
“Master.” Press “Enter” to confirm.
Note: See “AUTO” menu to create internal programs.
RESETDEFAULT
Restores the factory default settings on the fixture.
w
Access the menu by pressing the “Mode Esc” key.
w
Use the up/down arrow keys to reach the “OPTION” menu and press
“Enter.” Then use the left/right arrow keys to access the “ResetDefault”
submenu.
w
Use the right/left arrow keys to select ON to perform a reset to defaults.
Press “Enter” to confirm.
INFO
TIME INFO.
Current Time
Shows the number of hours the fixture has been operating since it was
powered on.
w
Access the menu by pressing the “Mode Esc” key.
w
Use the up/down arrow keys to reach the “INFO” menu and press
“Enter.” Then use the left/right arrow keys to access the “Time Info”
submenu.
w Use the left/right arrow keys to select “Current Time”, and press “Enter”
to display the value.
Ttl Life Hrs
Shows the fixture’s total number of hours of operation.
w Access the menu by pressing the “Mode Esc” key.
w Use the up/down arrow keys to reach the “INFO” menu and press
“enter.” Then use the left/right arrow keys to access the access the
“Time Info” submenu.
w
Use the left/right arrow keys to select “Tlt Life Hrs”, and press “Enter”
to display the value.
Last Run Hrs
Shows the fixture’s length of operation since the last time this counter
was reset.
w Access the menu by pressing the “Mode Esc” key.
w Use the up/down arrow keys to reach the “INFO” menu and press
“Enter.” Then use the left/right arrow keys to access the access the
“Time Info” submenu.
w Use the left/right arrow keys to select “Tlt Life Hrs”, and press “Enter”
to display the value.