Installation and Connection Instructions
Now you know how the ERO 150BSW works. So that the device is used in the correct and safest way,
please make sure to follow the installation and connection instructions.
Make sure that children do not have access to the device or any connecting cables. If there are children
present, make sure that they are supervised. Since the device can be placed upright or be suspended, it is
possible for children to pull on any connecting cables and cause the device to fall. To prevent any accidents
or injury, this must be taken into account whenever the device is being positioned and/or installed.
Upright use
When you want to place the ERO 150BSW in an upright position, make sure that the device is placed on a
stable surface such as a table, DJ booth or bar. The ERO 150BSW is fitted with feet to ensure that it sits
stable where it is placed and without danger of shifting or slipping while in use.
Suspended use (brackets)
Should you want to suspend the ERO 150BSW, please use the mounting brackets that are already fitted on
the base plate of the moving head. These brackets can be mounted by inserting, then quarter-rotating the
quick couplings into the opening.
If you want to suspend the device with a half-coupler or G-hook, this can be done by using the pre-drilled
holes in the bracket. Standard hooks and/or brackets for 35 or 50 mm tubes (trusses or light stands) are
available from your local retailer.
Hardware for mounting the ERO 150BSW to the wall, ceiling, or beam is not included. Contact a specialist if
you're not sure what hardware is required for your situation. A wooden beam and stone wall require different
mounting methods.
Should you want to suspend the ERO 150BSW, you will need to attach a safety cable to the armature. This
is not included, but is available at your local retailer. The ERO 150BSW is equipped with an eyelet for
hooking a safety cable. Once it's hooked on, you can wrap the cable around the truss or light stand and
attach it again to the same hook. This ensures the device is secured and prevents it from falling, even if one
or both of the brackets should come loose.
Ensure that the safety cable has a load capacity of 10x the weight of the armature and that the device can
not fall farther than 30cm. You can wrap the safety cable around the truss or light stand several times to
ensure the fall is as short as possible. The shorter the fall, the less chance of damage or injury.
Light source
The ERO 150BSW uses powerful LED modules that are made more powerful by a special lens that groups
and focuses these beams, much like a magnifying glass. Since the human eye cannot adjust quickly enough
to sudden and intense exposure to the level of brightness this device produces, never look directly into the
lens at close range. While it won't result in permanent damage, it can cause temporary blind spots which
may cause disorientation and discomfort.
Cooling
The ERO 150BSW is cooled by fans fitted in the head and the housing. These are activated whenever the
device is switched on. Make sure the fans and vents are not blocked and regularly check that they are
functioning normally. Be aware that should the fans becomes clogged with substances like dust, smoke and
moisture, this may impair operation and shorten the life-span of the device.
Parts and repair
This product does not include spare parts and can not be repaired by the user. Any inspections and overall
maintenance should be carried out by a specialist only.
Cleaning and maintenance
Clean the exterior of this device on a monthly basis with a dry, or slightly damp microfibre cloth. Ensure that
The information shown in this user manual could be subject to change without further notice.
Version: 1.1
Date of creation and initials of author: 07-10-2019 RV
Date of revision and initials of author: -
